Perfect for Any Room in a Home or Office. Plug-and-play kit boosts cellular signal in a single room. Transmits and receives an improved wireless signal inside your home or office and requires no physical connection to your phone.
The Wilson DT Desktop kit is specifically designed to create a stronger signal on your desktop or work space. It is not designed to broadcast throughout an entire house.
Best results are seen in a small room area. Broadcast distance for this kit and any other cellular
amplifier kit is dependent upon the signal strength outside the building where the outside antenna is mounted, the size (gain of the amplifier) and the frequency that your 800MHz carries much farther than 1900MHz.
Works with all Cellular/PCS cell phones and laptop data cards *Except iDEN/Nextel
Features:
• Complete package - everything you need is in the box
• Wireless operation - no connection to cell phone or data card
• Works in any inside location where improved cellular signal is needed: homes, offices, buildings
• Power control logic ensures maximum output power is within cellular standards
• Works on all generations of CDMA, TDMA and GSM
• FCC and IC type accepted
Benefits:
• Greatly reduces disconnects and drop-outs
• Multiple cell phones and data cards can be amplified simultaneously
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Easy to install and use, and it's affordable
• Outside antenna may be mounted outdoors on a pole or wall, or indoors on a window Package Contents:
• Wilson® SIGNALBOOST™ DT Cellular Signal Amplifier
• Outdoor / Window Directional 5 dB Cradle Antenna
• Omni-Directional Inside Antenna
• Two lengths RG6 Cable, 20' and 30'
• All Mounting Hardware
• AC Power Supply
Specifications:
Part Number 801247
Frequency 824-894 MHz / 1850-1990 MHz
Gain 50 dB / 50 dB
Linear Output Power +30 dBm
Max Output Power +35 dBm
Noise Figure 3.5 dB nominal
Flatness ± 2 dB / ± 2 dB
Isolation > 90 dB
Power Requirements 110-240 V AC, 50-60 Hz, 0.6 A max
Connectors TNC Female / F-Female
Dimensions 6.2 x 4.2 x 1.5 (inches) 15.7 x 10.7 x 3.8 (cm 0.64 lbs / 0.29 kg
Installation Guide
Works with: HP TouchPad, Pre 3, Veer / Palm Pre 2, Pixi Plus, Pixi / Centro, Treo Pro, Treo 800w, Treo 755p, Treo 750, Treo 700p, Treo 700wx, Treo 700w, Treo 680, Treo 650, Treo 600, Treo 300, Treo 270, Treo 180, Treo 90
(56)
(1)
(55)
We also accept